Tinker Board Forum

Full Version: Official Armbian - Image won't to boot
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello together,

i have 2 Tinkerboard S and I want to install (normally) the ARMBIAN OS-Image Armbian Focal.

I flash my microSD - Card Smith BelanEtcher and it seems everything as okay.
But if I insert it on the slot and give him the external POWER -> it doesn't boot.

So, if there any tricks to boot it with this image?
Can everybody help me here, please!

Best regards from Germany

Rolleyes Shy
Zhéxué M.
(07-01-2020, 07:13 PM)Zhexue.M Wrote: [ -> ]Hello together,

i have 2 Tinkerboard S and I want to install (normally) the ARMBIAN OS-Image Armbian Focal.

I flash my microSD - Card Smith BelanEtcher and it seems everything as okay.
But if I insert it on the slot and give him the external POWER -> it doesn't boot.

So, if there any tricks to boot it with this image?
Can everybody help me here, please!

Best regards from Germany

Rolleyes Shy
Zhéxué M.

Have you tried different microSD card or doesnt S version has internal memory also do you have to make some changes?
(07-08-2020, 05:51 PM)Monni Wrote: [ -> ]
(07-01-2020, 07:13 PM)Zhexue.M Wrote: [ -> ]Hello together,

i have 2 Tinkerboard S and I want to install (normally) the ARMBIAN OS-Image Armbian Focal.

I flash my microSD - Card Smith BelanEtcher and it seems everything as okay.
But if I insert it on the slot and give him the external POWER -> it doesn't boot.

So, if there any tricks to boot it with this image?
Can everybody help me here, please!

Best regards from Germany

Rolleyes Shy
Zhéxué M.

Have you tried different microSD card or doesnt S version has internal memory also do you have to make some changes?
Hey Monni,
thank you so much. But both boards had internal memory. By one board it fails if I want to install the OS; but i verified that again.
Best regards


Zhexue M.