Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yocto and U-Boot question
#1
I'm building a custom image for TB using Yocto. I'm using layers from github.com/rockchip-linux and kernel from github.com/TinkerBoard/debian_kernel (2.0.5 tag) and everything is good, including WiFi and 3D.

However, strange thing is that I'm also using u-boot from rockchip repo, but when I try using u-boot from github.com/TinkerBoard/debian_u-boot (2.0.5 tag), the board doesn't boot at all. So I wonder, why is that? And also, what's the difference, what's supposed not to work if I use u-boot from rockchip repo?
Reply
#2
(05-11-2018, 08:36 AM)pronvit Wrote: I'm building a custom image for TB using Yocto. I'm using layers from github.com/rockchip-linux and kernel from github.com/TinkerBoard/debian_kernel (2.0.5 tag) and everything is good, including WiFi and 3D.

However, strange thing is that I'm also using u-boot from rockchip repo, but when I try using u-boot from github.com/TinkerBoard/debian_u-boot (2.0.5 tag), the board doesn't boot at all. So I wonder, why is that? And also, what's the difference, what's supposed not to work if I use u-boot from rockchip repo?

Hi ,

Are you using tinker-rk3288_defconfig to build uboot ? 

Regards
-Ash Paraker
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)