Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
In search of some info

        I am attempting to run the rt preempt patch on the Tinker kernel, and much like the folks before me, no success. I had the same issues with the 3328 chip on the renegade, both use the rockchip kernel. Maybe someone can share some info.

what are the differences between the rockchip and mainline kernel ? there is another post where the mainline was successfully patched, the author stated he added the tinker changes to the vanilla linux 4.4.7, where would this info be ?

 I have successfully patched the mainline kerenel , but it wouldnt load. I would think the .dbt file would be the same ,would it?

Does the new kernel have to reside in a specific area, right now the patched mainline is in a directory I made up called realtime, should it be somewhere else?

which is the correct deconfig file rockchip_linux or  3288?


Building image:
 $ cd debian_kernel
 $ make ARCH=arm miniarm-rk3288_defconfig -j16
 $ make zImage ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j16
 $ make modules ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j16
 (Note: As of 2018-01-05, if may be necessary to edit the Makefile to add -Wno-misleading-indentation to the CFLAGS_MODULE if you are using GCC 6 and up.)
 $ make ARCH=arm rk3288-miniarm.dtb CROSS_COMPILE=arm-linux-gnueabihf- -j16
 $ make dtbs ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j16

I hope that will help you.
Big Grin  I'm Lyle. 

Forum Jump:

Users browsing this thread: 1 Guest(s)