This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
disable HDMI monitor detection and force connected status
#1
I am looking for a way to disable HDMI monitor detection and force connected status. 

Simmilar settings exist on
* Odroid XU4 board
   # HDMI Hotplug Force (HPD)
   # 1 = Enables HOTPlug Detection
   # 0 = Disables HOTPlug Detection and force the connected status
   setenv hpd "0"
* Raspberry PI board
   # hdmi_force_hotplug
   # Setting hdmi_force_hotplug to 1 pretends that the HDMI hotplug signal is asserted, so it appears that a HDMI display is attached. In other words, HDMI output mode will be used, even if no HDMI monitor is detected.
   
Is there similar setting on Asus Tinkerboard ?
Any info is welcome.

I am using Asus Tinker board with latest OS (Latest version v2.0.4 - Debian stretch based. 2017/11/15)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)