This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DAB+ Radio support
#1
Good morning.

I want to listen to digital radio with the Tinker Board.
In Germany this is called DAB+.
But I don't know if this term also exists in other European countries or if it has a different name there.
I bought a SDR-radio-dongle which is connected via USB.
In the internet the DAB+-software welle.io is most often recommended.

I found it, it is available as appimage:
https://github.com/AlbrechtL/welle.io/releases

I made the appimage file executable and then tried to run it.
But nothing happened.

There is a hint for its use on Raspberry pi:
To use it on macOS or on a Raspberry Pi you can compile welle.io direct from the sources.
To compile welle.io check sources.

Must this also be done for use with the Tinker Board?
Does any of you know any easy to follow instructions how to compile for the Tinker Board yourself?

Many thanks in advance for any help.

Regards
Karl
Reply
#2
I think you might use this, but is for Android.
There are some information on this page, but I didn't read all carefully.
Light blue words might be a link. Have you try to click on them? Big Grin
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)