This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
USB Connection from TinkerBoard to Windows
#11
You may need to explain more carefully, or a list of all the items.


BTW, for general USB device, like, USB keyboard, mouse, drive, etc. they're Slave mode/client.
And they would need to connect to Host device, like the PC.
So in above case, you need to connect via Tinker's Type-A USB port (x4).

Also if you want to let Tinker as an Device at your PC, like connect an Android mobile via ADB mode.
You can connect ADB via Internet or via USB.
(but via internet would be more easily.)
Reply
#12
Hi,
i want to connect ADB via USB. So the Type-A USB port (4x) can not be used ?
I have to use the pins from the micro USB. Is this wright ?
Or can the Type-A USB ports also be used ? But for this what has to be chaned in the android settings ?


Best Regards
Markus
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)