This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Try port Ubuntu Core to TinkerBoard
#1
Hey Guys,

I'm new on Tinkerboard, coming from Raspi Wink

In general I use my own ubuntu core images like for raspian, but since of time the raspi doesnt have enough power and I change now to tinkerboard Smile 

I have an couple of questions about the u-boot loader, because I need to split several parts into snaps, like bootloader, kernel, rootfs where the ubunut_image tool will build on that an SD/EMMC image.

I have so far the kernel and the rootfs snaps done, but currently I stuck on the bootloader, also I see that some Partitions needs to maybe created on time 

like /dev/mmcblk1boot0 and /dev/mmcblk1boot1 on emmc.

Are these Partitions create during boot or should be flashed also by the dd process?

How is the boot structure?

it's the same as the ELAR-Systems Ubunut also from TinkerOS?

maybe someone can point me in the right direction.

Thanks and greets
Reply
#2
(02-12-2019, 01:20 PM)ubuntupicore Wrote: maybe someone can point me in the right direction.

Ubuntu (better than Ubuntu Core, snapd works, ...) or Debian download:
https://www.armbian.com/tinkerboard

Quick info:
https://docs.armbian.com/Quick_facts/

Build tools:
https://docs.armbian.com/Developer-Guide...eparation/
Armbian. Lightweight Debian Stretch or Ubuntu Bionic for Tinker Board.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)