This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
TinkerBoard S cannot detecting SD Card
#1
Hi, 

I have set up a new TinkerBoard S booted up from onboard eMMC. I have also inserted as SD card into the SD card slot.
I reboot it again buy still cannot see the additional storage (SD Card) on the file explorer.

What should i do to make the SD card visible?
Reply
#2
Open a console and type
Code:
dmesg |tail
after inserting the SD card.
Post it over here.
Light blue words might be a link. Have you try to click on them? Big Grin
Reply
#3
I actually have the same issue if I use the onboard 16GB drive as the default booting partition. I cannot detect the SD card and thus not able to use the SD card as the extra storage. So I end up using the SD card as the default booting partition and forget about the onboard storage. The Extreme SanDisk card is much faster than the onboard storage and I am really happy about it.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)