This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Regarding Tinker Edge T External Antenna connection
In Coral SOM used in the Tinker Edge T, there are both a u.FL connector and Chip Antenna on the same RF path trace.
So in order to use the external antennae, is there any need to remove any capacitor or inductor in the path of chip antenna in order to avoid interference in the RF path?
Please advice on the usage of external dual band antennae in the Tinker Edge T

You can use external antenna without removing any components in the path. But suggest to use chip antenna first.

Both of J1301 and J1302 can be support WiFi 2.4G and 5G, you can use either one for your application.
Thanks for the info!

Forum Jump:

Users browsing this thread: 1 Guest(s)