This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
USB log error
#1
Hello guys,

I've been working with Sixfab LTE shield, Asus Tinker Board S and Quectel EC25-AU boards. Connection between Sixfab LTE shield and Asus Tinker Board S is over USB cable, that sometimes gave me this error.

Code:
[  563.135522] dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04400009
[  593.157440] dwc2 ff540000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown
[  593.170337] dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04600009
[  594.158947] dwc2 ff540000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown
[  594.171883] dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04600009
[  597.158322] dwc2 ff540000.usb: dwc2_hc_chhltd_intr_dma: Channel 12 - ChHltd set, but reason is unknown
[  597.171377] dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04600009
[  600.160826] dwc2 ff540000.usb: dwc2_hc_chhltd_intr_dma: Channel 3 - ChHltd set, but reason is unknown
[  600.173820] dwc2 ff540000.usb: hcint 0x00000002, intsts 0x04600009

This error affects in Tinkerboard performance (it crashes sometimes) and internet connection (no connection over 3G/LTE).
Any info will be very helpful.
Best regards!
Reply
#2
Did you see this in idle or during data transmission?

Thanks a lot!
Reply
#3
(07-06-2020, 06:22 AM)leslie_yu Wrote: Did you see this in idle or during data transmission?

Thanks a lot!

Hi Leslie,

I don't know if it is in idle or data transmission, I think maybe is with data transmission because tinkerboard is always "connected" to internet with sixfab. I've searched this log error and everything refers to kernel or usb cable error. I have many of these tinker boards and it happens randomly in few of them.

PS: Kernel version I'm using is:
Code:
4.4.132+
Reply
#4
We are trying to repeat this. Will keep you posted.
Reply
#5
Did you see this in idle or during data transmission?
Reply
#6
(07-20-2020, 02:22 AM)leslie_yu Wrote: We are trying to repeat this. Will keep you posted.

i'll wait for your answer, thanks!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)