This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to set tinker board as digital signage in 10 mins
#1
Tinker Board is suitable for digital signage. Here is the example how to set tinker board as digital signage in 10 mins. 

Before you start: 
1. Prepare the tinker board / tinker board s with dabian OS
2. Login the ASUS device management (https://aicc.asus.com/) and install aicc agent in your device. Make sure you can find the status in AICC dashboard. 
3. Create the content in youtube 

How to set tinker board as digital signage: 
Step 1: install firefox in Tinker board 
"sudo apt-get install firefox-esr"

Step 2: allow autoplay in firefox 
you can refer to the detail flow here

Step3: Add root to access control list in you tinker board 
"xhost si:localuser:root"

Step4:  Remotly control your tinker board to show the Youtube content. 
1. Login AICC website  and go to "Device manager => All devices" 
2. Click your tinker board and then click "Command"
3. Send the command below to your tinker board.  

env DISPLAY=:0 firefox -kiosk "https://www.youtube.com/embed/bQ1ASdMSo5w?loop=1&autoplay=1&playlist=bQ1ASdMSo5w"

Step 5: Enjoy the digital signage with remotly control. 


Thanks.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)